The Defpom Forum, for RadioMods, S&M Software and Music by The Defpom

my swr is 4-10 depending if i ground it or not.when its not grounded the swr is around 6.when grounded my swr is 10.it's a cobra 29 in a vovlo tractor.i ran a hard wire ground from antenna to door hinge top and another hard wire from bottom of hinge to frame.not much difference.any ideas.mike

finally got my super scanner up and was working good.one problem cant switch beams.took it down and had a friend of mine look at it but cant seem to getrelays to work right on it.the three relays work independenly but they dont seem to work together.i have a four pin connector on relay box and three...

just now talked to my radio dude and he said that was the only channels i could get with this radio and there is not other caps or resistors in the wires from switches.so i guess were out of luck unless someone else knows more than we do keep in touch tks mike

no reply from the fellow i bought radio off of .so here goes i took mine apart to try and help you to set up yours im not radio illerate so i8ll do my best any questions please email me.looking at front of radio right side up.remove covers and on mine there are 2 small switches that were put on back...

i bought a royce 642 with mods done on it will contact him to see if he has mods done or by someone will get back to you mike

http://www.dxzone.com/cgi-bin/dir/jump2.cgi?ID=8485 hope this helps mike

what do you mean chanel a royce radio dont understand mike