The Defpom Forum, for RadioMods, S&M Software and Music by The Defpom

Well see if this works. Attached is a photo that shows where I installed the switch (left side in front of mic connector).

Hi Rick!

Guess I was revising my post while you responded. I had a brain fart this morning after putting the radio back it the truck then reviewing the frequencies and found the ones the mod added. Thanks for your help.

UncleT

Well I got the 10kc mod done. It basically gives you 5 new frequencies to use. 26.955 (channel 4, switch down) 27.045 (channel 8, switch down) 27.095 (channel 12, switch down) 27.145 (channel 15, switch up) 27.195 (channel 20, switch down) Cheers. :wink: Thanks Rick for the additional schematic.

Hi Min, Mater-o-fact I just picked up the parts today. I think I'm going to go back and get a flip switch instead of the slide switch. After playing with the slide switch I think it may be hard to find the center position while driving. Plus you only have to drill a whole for a flip versus cutting a...

frogman296,

no. every time I pass the electronics store I don't have my parts list
No hurry on my part anyway. I will get to it though. I'll add the results to this post when I do.

Thanks Rick, I'll reference it when I dig into the radio. I like the slide switch idea.

Thanks, guess I missed that part

Hi all,

http://www.cbtricks.com/radios/galaxy/d ... kc_mod.htm

Does anyone know if the SPDT switch is a ON/ON or ON/OFF/ON switch?

Thanks

UncleT

I think the NTE583 replaced the ECG583