The Defpom Forum, for RadioMods, S&M Software and Music by The Defpom

Hi 817,

About to do this mod on a PC122, using 520 mosfets, we will see if you are right, and I do think you are,

Cheers Pirate

Hi all,

Has anyone played around with improving the receive and noise blanking of a PC122 or pro 640e by using Schottky diode replacement, much like the DX949, 959, these diodes really help there receive bigtime, any input would be great.

Andy Archer

Hi all,

Looking for mosfet final mods for a PC122, not the XL, has anyone got any info for this???.
Cheers Andy

Hi, thats a good mode for the 810e, has anyone got info to put mosfet finals in a PC122???, not the XL, cheers Andy

Hi,

Need a service manual for a SBE Console VI, same as SBE Sidebander VI, the Craig 131 uses the same PLL chip but the alignment is too different to be of any help.

I really only need the alignment procedure....

Cheers Andy Archer
41WR4141

Hi all,

Here is a cobra using the mb8719 pll, does anyone know how to dual band it NZ and USA without a slide clarifier for the 5khz shift????, it uses a 11.1125 crystal, cheers

hi, check the varicap diode in the vco, it may be the prob, cheers

Radio Make and Model: uniden 810e PCB Number: PLL Number: Test gear available: meter Symptoms: no audio on am transmit What is working: everything bar am audio transmit What has been tried: Did it suddenly happen ?: Anything else that may be of help?: Owner blow power supply, decided to run 13.8v di...

hi all, need to know the 11 meter mod for a ts-120s, any ideas???, cheers andy