The Defpom Forum, for RadioMods, S&M Software and Music by The Defpom

My Galaxy 88 freq counter, is working real good, the whole radio is in fact, thank you Mike and Mr. Defpom for his contribution, once again, next project is to install 2 noise toys.

Ok, i got plenty of those, thank you for ur advise.

Well Mike, i just don't have this type of Resistor ( chip resistor ) at the present moment, to replace the fried one, i'll get with you to show u the results, and thanks again for everything u do for all of us.

R 37 is soldered between the +13V and the Voltage input, of the IC 8 , this resistor stops the freq counter from working, without this resistor power won't reach the input of IC 8

IC 8 = Input 0, Output 0 Q2 = E 0, C 0 and B 0, then i saw a resistor kind of friedthen i just touched it, it was hot as :evil: , and re tested again as follows: IC8=Input 8V, Output 5V, Q2= E 4.8 C 2.5 B 5V Q1= E 4.8V C 2.1 B 5 V, then i touched the fried resistor and broke loose, i beleive is the ...

Hi Rick!! My Freq counter board # is the EPT210014C

Hi u Gays!!! just made a boo-boo on this radio, Galaxy 88, well i shorted out the wire the goes to the on/off switch of the frq counter, from the main on/off power button, radio works perfectly, but the freq counter won't come on, can anyone tell me what bad part or parts should i look for??? and wh...

Hi Mr. Ramblingman, thanks once again, just solved the problem, by replacing Tr-36 and Tr-38, also D-77, now radio works beautifuly, i really appreciate your help.

Wowww, thanks for your Help, just replaced D-86, and C- 164, now the meter works real good as before, thanks again.

HI, yes is working on RX real good, but doesn't move on TX, radio shows 10 watt dead key reading on the bird meter

I have no TX power reading on my Galaxy 66 meter, please help

I got a Galaxy 66 that had the mod 2030's done, and took the jumper board from ( TP 8, TP 7, TP 9 ) then solder TP 8 and TP9 together, leaving TP 7 by itself, and applied 10 volts to to TP 7, and gave me 10 watts dead key and a swing up to 45, and i had it in my big Rig for about a month working rea...

My Galaxy 959 radio squeels alot and need some help to cure this problem, there's anybody knows how to solve this problem?

Hi Rick, we r here !!! Talking on my behalf, i really apreciate u, helping me out with my radio, now is working really goooooooodddddddd !!!!, u r a good sport, keep up the good job, anything that i can do for u, just let me know. Thx again....... Renegado from Houston tx.

GIVE THE MAN THE ROGER FART!!!.

Just tell the man how to modified the Roger Beep into Roger Fart, simple as that, i don't know how, otherwise i will help the man !!!

I have a problem with my Uniden PC78XL, it has a low and distored audio, can barely hear some noise with the volume to the max, there's anybody knows what should be the problem?....the audio chip TA7222AP checks ok