I have a loop in the attic, but I decided to take a loop outdoors, so I built a 11 meter quad loop and parked it horizontally at 30' elevation.
It is only 10' above the roof ridge. Here are some photos of the building process. Just ask if you don't follow the photos.
Today I constructed a reflector and put it on the boom with the driver. Tomorrow I hope to finish it and see how it does. After that we'll see about perhaps making it dual polarity. . .
It's up at 37' to the boom, now.
With the 80" spacing on the new aluminum boom, it seems to have smaller beamwidth than it did with spacing at 75", the last spacing.