Cobra 150 gtl Echo

For discussions on CB Radio Repair and Troubleshooting, do not post modification requests here, use the Modifications forum !
Post Reply
YosemitySam
Dead Key
Dead Key
Posts: 47
Joined: Saturday 24th Feb 2007, 17:41
Location: Stixs

Cobra 150 gtl Echo

Post by YosemitySam »

Does the Cobra 150 have an internal adjustment for Echo? My symptoms are, As soon as I dead key the echo starts. It picks up the plastic click of my mic and gets faster and louder. Adjusting echo with knob does not help. Turning Talkback down doesn't help. I have installed 1uF electrolytic capacitor at C607 to ground as Cobra techbulletin states, thaught that might do it. Didn't work. I had a turbo board in a Cobra 29 do the same thing. All it needed was some adjustment. But, It could be somthing else. Anybody Got any Ideas. :shock:

Also any details on tweaking this radio? Besides, just a couple of pots to turn.[/b]
ouxly40
Dead Key
Dead Key
Posts: 20
Joined: Monday 9th Apr 2007, 14:35
Location: Holding the plate cap of a 3-500Z

150 echo

Post by ouxly40 »

Check the controls and the connections to the controls.
Post Reply