For discussions on CB Radio Repair and Troubleshooting, do not post modification requests here, use the Modifications forum !
SoCal392
Dead Key
Posts: 21 Joined: Thursday 15th Jun 2006, 8:22Location: California
Post
by SoCal392 Thursday 8th Mar 2007, 8:59
its getting worse the more i use. allmost will not transmit at all. static was in rx also but it doesnt seem to be anymore. which ic or transistor actuates the tx? thx peeps
SoCal392
Dead Key
Posts: 21 Joined: Thursday 15th Jun 2006, 8:22Location: California
Post
by SoCal392 Thursday 8th Mar 2007, 16:05
btw this is a 14b pcb
SoCal392
Dead Key
Posts: 21 Joined: Thursday 15th Jun 2006, 8:22Location: California
Post
by SoCal392 Saturday 10th Mar 2007, 22:45
after close examination and troubleshooting, I replaced the crystals on pcb and bam! sucker is up and running again
