Turner +3 Help

For discussions on CB Radio Repair and Troubleshooting, do not post modification requests here, use the Modifications forum !
Post Reply
Mork
Dead Key
Dead Key
Posts: 22
Joined: Wednesday 27th Jun 2007, 1:20
Location: Newfoundland Canada

Turner +3 Help

Post by Mork »

Hi People,

I am looking for a schmatic diagram (not a block diagram) or a couple of high resolution pictures of the inards of the Turner +3 desk mic. I need to see what wires go where from the amp board to the switches and gain control.
Any help would be greatly appreciated.

Jim

jamesm@nl.rogers.com
captian_radio
Frequent Keyer
Frequent Keyer
Posts: 84
Joined: Friday 8th Sep 2006, 9:37
Location: nova scotia

Turner + 3

Post by captian_radio »

Jim I have an old turner +3 that I can have a look at , can you tell me the color of the wires that have been unhooked and I can maybe help you.
Bob
Mork
Dead Key
Dead Key
Posts: 22
Joined: Wednesday 27th Jun 2007, 1:20
Location: Newfoundland Canada

Post by Mork »

Bob,

I need to know where the three wires from the relay/electronic switch connect.

Thanks
captian_radio
Frequent Keyer
Frequent Keyer
Posts: 84
Joined: Friday 8th Sep 2006, 9:37
Location: nova scotia

Post by captian_radio »

Heres what I have on my mic, with the bottom cover removed from the mic and the mic head facing towards you, mic upside down,on the relay switch there are 6 contacts,right side of switch 1st one is red middle one is green,last one is black. hope this helps and sorry about this type of description,but I wasn't able to draw it out and post it for you.Also where do you live in NFLD, I am from there, used to live in Bay Roberts many years ago
Bob
Indiana Jones
Newbie
Newbie
Posts: 3
Joined: Saturday 4th Aug 2007, 3:27
Location: Fort Worth, Texas

Turner +3 Owners Manual with Wiring Diagram

Post by Indiana Jones »

Please see the attached .pdf file. I hope this helps.
Making sure everything I do reverberates that irresistable new car smell.

Indiana Jones
Post Reply