President P-300

marveylus22 · Post by **marveylus22** » Tuesday 25th Dec 2007, 6:56

I am looking for the scematics on this radio. Any help would be much appreciated. Thank you.

Rick · Post by **Rick** » Tuesday 25th Dec 2007, 7:45

What is the PCB Number?

marveylus22 · Post by **marveylus22** » Tuesday 25th Dec 2007, 7:49

The only #`s I can find is as follows. PB-008AA

marveylus22 · Post by **marveylus22** » Tuesday 25th Dec 2007, 7:51

While we are at it Sir Rick, all I need is the order where the mic wires are soldered to the board. Some one removed the roger beep board, and didn`t mark the wires.

marveylus22 · Post by **marveylus22** » Tuesday 25th Dec 2007, 8:34

I found it PC833AF. Thanks again Rick.

http://www.youtube.com/user/TheDefpom · Post by **The Defpom** » Tuesday 25th Dec 2007, 9:41

That is the same PCB as used in the AX144 / AR144 radios, I have a copy of the block and circuit diagram in the members area.

James Unit 198 · Post by **James Unit 198** » Wednesday 26th Dec 2007, 3:39

This is the same as Cobra 146 GTL

James.

Chevin · Post by **Chevin** » Sunday 30th Dec 2007, 5:15

I found this on CBTricks.
http://www.cbtricks.com/radios/cobra/14 ... tl_sch.pdf

The Defpom Forum, for RadioMods, S&M Software and Music by The Defpom

President P-300

President P-300

Re: President P-300