help please low power

For discussions on CB Radio Repair and Troubleshooting, do not post modification requests here, use the Modifications forum !
Post Reply
davedonna
Dead Key
Dead Key
Posts: 16
Joined: Sunday 20th Jan 2008, 6:59
Location: east yorks

help please low power

Post by davedonna »

bord number jpmxx0276d

delta force magnum am/fm/ssb/pa 10m mobile

got low power less than 1 w damaged due to hi SWR res number 376 22 ohm getting hot tested zener diodes there ok and i have replaced both the c1969 and c2166 out put transistors and still low power

help any one got a clue

ps there is also sound coming out of speaker during tx
User avatar
Rick
Technical Helper
Technical Helper
Posts: 1041
Joined: Sunday 4th Jun 2006, 12:52
Location: UK

Post by Rick »

What radio are you talking about?
A board number on its only will not help.
The only way we can help you is for you to help us.
So please read the info in the link below, or you post will be ignored.
www.radiomods.co.nz/forum/viewtopic.php?t=312
Rick.
davedonna
Dead Key
Dead Key
Posts: 16
Joined: Sunday 20th Jan 2008, 6:59
Location: east yorks

magnum delta force 10meter

Post by davedonna »

hi the cb is a magnum delta force 10 meter cb that is all no i dont no the pll number any help

:cry: :wink: [/quote]
davedonna
Dead Key
Dead Key
Posts: 16
Joined: Sunday 20th Jan 2008, 6:59
Location: east yorks

Post by davedonna »

the cobra is a 148 gtlx dx that is def and no dx thanks for the time
User avatar
Rick
Technical Helper
Technical Helper
Posts: 1041
Joined: Sunday 4th Jun 2006, 12:52
Location: UK

Re: Magnum delta force 10meter

Post by Rick »

Sounds like a bad final.
Rick.
davedonna
Dead Key
Dead Key
Posts: 16
Joined: Sunday 20th Jan 2008, 6:59
Location: east yorks

Post by davedonna »

thanks rick got the delta force going was a bad final
Post Reply