cobra 148gtl dx mk2 running hot

For discussions on CB Radio Repair and Troubleshooting, do not post modification requests here, use the Modifications forum !
Post Reply
angusuk
Frequent Keyer
Frequent Keyer
Posts: 63
Joined: Thursday 10th Apr 2008, 12:07
Location: LEICESTER

cobra 148gtl dx mk2 running hot

Post by angusuk »

seems to run very hot after using for about 1 hour,is this normal,casing gets hot,does have a large added heatsink on the back.

thanx angus
User avatar
Rick
Technical Helper
Technical Helper
Posts: 1041
Joined: Sunday 4th Jun 2006, 12:52
Location: UK

Re: Cobra 148GTL-DX mk2 running hot

Post by Rick »

If the output is more then 5 watts on AM/FM then it will get not, especially down the left-hand side, sooner or later it will blow the final.
Rick.
angusuk
Frequent Keyer
Frequent Keyer
Posts: 63
Joined: Thursday 10th Apr 2008, 12:07
Location: LEICESTER

Post by angusuk »

rick i forgot to mention it does have a fm varable power nob on the back,
and looking inside its had the pot removed and the 2 wires added to the nob.
so should i remove the nob and fit a new pot and set to 5watts.to be on the safe side.
Post Reply