cobra 29 LTD Audio is WEEk

For discussions on CB Radio Repair and Troubleshooting, do not post modification requests here, use the Modifications forum !
Post Reply
woody
Dead Key
Dead Key
Posts: 23
Joined: Wednesday 21st May 2008, 2:39
Location: Godfrey,Illinois

cobra 29 LTD Audio is WEEk

Post by woody »

Have A cobra 29 Ltd With DIsorted audio put evey thing back to stock 3watt dead key no foward swing,checked & replaced final (final checked good ).when i talk it sounds bad.Help
ramblingman
Technical Helper
Technical Helper
Posts: 331
Joined: Sunday 21st Jan 2007, 16:35
Location: mississippi

Post by ramblingman »

Check the two largest elect. caps in front of the audio chip.
I had one awhile back with similiar troubles.And one of the two
of these caps were bad.You could see it was bulged at the base of it.
I cant remember the number of the cap. right off.But it will be
the largest or second to largest cap. kinda in front and too the rear
of the audio chip.
woody
Dead Key
Dead Key
Posts: 23
Joined: Wednesday 21st May 2008, 2:39
Location: Godfrey,Illinois

Post by woody »

I have already done that i replaced both of the caps that you are refering to.I'm using a sing wave generator and i'm inserting the tone at the collector of tr18 wich is rather loud.I'm goiing to look at C74 ceramic cap to see if this might of gone south. thanks for the reply.Woody
User avatar
WARLORD136
Frequent Keyer
Frequent Keyer
Posts: 63
Joined: Friday 22nd Aug 2008, 5:25
Location: east side, west virginia
Contact:

cobra 29

Post by WARLORD136 »

woody, you are minus 2 points for spelling. week in this instance is spelled weak. please continue the test. just kidding woody, don't get mad. if it wasn't for spellchecker i " wood" be lost. lol.
WARLORD 136 <> some people are affraid of the dark---some are affraid to leave it<>
woody
Dead Key
Dead Key
Posts: 23
Joined: Wednesday 21st May 2008, 2:39
Location: Godfrey,Illinois

Post by woody »

I found the problem the radio is back in the big rig working fine.This is the first time that I have had the dynamic control go bad.I can usualy clean the control and that would fix it. This time it was bad.
Post Reply