Maxon MCB 45 W
Posted: Sunday 1st Apr 2007, 12:01
Does anyone know if a Maxon MCB 45W will take an echo board? These small radios have upper and lower channels already in them when new, all you have to do is move two solder bridges to "turn them on". They are great little radios that don't take up a lot of space. I am not sure how to tell if it will take an echo board. Any help/advise on this or any other mod for this radio will be greatly appreciated. Thanks.
I would just buy a good echo mike not much room inside for any thing . I have one and I use a vc 300 echo box works great !!! Un fortunatly they quit making them about 20 yrs ago . Chia