Page 1 of 1

Idenify this beam

Posted: Friday 27th Apr 2007, 23:39
by JOHNNY BE GOOD
I was given a tower with a beam on it ,the people bought the house and just wanted it removed. The beam is basic H shape with a round ring suspended by two elements hanging down over the mast similiar to what I think an asto plane had on the bottom. Trying to idenify this beam so I might find specs. on lenght of elements when installing it at my house. Currently running on a ground plane so I think this beam will help. There is also a ASTRO PLANE on the other side of there house must be for non directional recieve. Figuring out how to use both will be my next project. Thanks for any info John

Posted: Saturday 28th Apr 2007, 11:03
by kc8mob
Using both is easy, Either use a relay to switch between the two or. Or co-phase them. You'd have to use a delay cable feedlin though to get it right. Like an extra 1/2 wave length of the opertaing freq. in coax.

Posted: Saturday 28th Apr 2007, 11:07
by kc8mob
Have to factor in the velocity factor of the coax too when you're doing your figureing.

Beam ID

Posted: Sunday 29th Apr 2007, 6:18
by JOHNNY BE GOOD
Thanks for the reply. Just wondering does the lower ring on the ASTRO BEAM give it a more multi. directional receive ? Thanks John