Page 1 of 1
Galaxy44v Super Talk mod
Posted: Sunday 3rd Jun 2007, 7:37
by marveylus22
I done this mod, and it works great, but my only gripe is now I have no variable low side control. I tried to readjust vr16 but still I can`t get my carrier no higher than .5 watts. The good news is it swings like crazy though.
Posted: Monday 11th Jun 2007, 1:45
by James Unit 198
If you need help. It would be best to tell the buds which mod you have done or point them to the site with the mod.
James.
Posted: Monday 11th Jun 2007, 4:57
by marveylus22
Did you read the topic James? Galaxy 44v super talk mod?
Posted: Monday 11th Jun 2007, 7:21
by James Unit 198
Which one as I have seen 5 different methods of doing the super talk mod on 3600 chassis.
With giving much info you wall not get an answer.
James.
Posted: Monday 11th Jun 2007, 11:16
by marveylus22
the one that is given free on this site...
Re: Galaxy 44v Super Talk mod
Posted: Thursday 14th Jun 2007, 4:23
by Rick
Lower the voltage of the zener diode.
Rick.
galaxy 44v supertalk mod
Posted: Tuesday 19th Jun 2007, 13:08
by ramblingman
have you tried adjusting vr-13,just a thought.good day.
Posted: Thursday 21st Jun 2007, 15:33
by kc8mob
Well you should really just use a 100K resistor instead of a diode.
Furterh more, are you finals alive with 13.8 or they still run by the 2sb754
Posted: Thursday 21st Jun 2007, 15:45
by marveylus22
It took out the super swing kit when I added the ERF 2030 mod to it. I still have the 2sb754 in it, but I got the upgraded 2sb817 in today. No need to the swing kit with the ERF in it.