Lincoln CPU or entire CPU PCB and inductors

[The Defpom]

I have a mint looking Lincoln here, only problem is the CPU itself has failed due to the radio being reverse wired by its original owner and it went through the radio blowing IC's left right and centre, after a lot of repair time I had the radio working again, but had intermittent CPU problems, then it suddenly died...

Does anyone out there have a Lincoln CPU, or the entire CPU PCB (even a faulty CPU PCB would be OK, as long as the CPU is in working order).

Maybe even a ChipSwitch IC?

I also need to get a few inductors.. labelled as L111, L105 (on main PCB) and L401 (on FM board) for some other Lincolns and HR2510s I have sitting here which need parts.

[Rick]

I do have the MPU but they need programming as they are prom array type. If you know some one with a Hitachi BN 293012 programmer or Dormans HIT 293012 programmer.

Rick

[The Defpom]

Unfortunately none (that I know of) has a programmer, I have an EPROM programmer, but it will not do one of those devices

[Rick]

I will see if my mate can still program them, but it was about 9 years when I had the last ones done. I do have one programed for just 10 meters with split frequency. Last week I sold my last complete MPU board I will have a look through my scrip one day next week.

Rick.

[The Defpom]

Thanks Rick, I would want one to be like the standard processor, or like a chipswitch, over here coverage down to 26MHz is important.

[The Defpom]

Anyone here speak German ?

I found this, it appears that they have some MPU's for sale,, I registered (I think!) and tried to buy some, but it did not seem to go through, can anyone speak German and possibly buy them on my behalf ?

http://www.mega-kom.de/eshop/product_in ... ts_id/2882