The Defpom Forum, for RadioMods, S&M Software and Music by The Defpom

Hi People,

I am looking for a schmatic diagram (not a block diagram) or a couple of high resolution pictures of the inards of the Turner +3 desk mic. I need to see what wires go where from the amp board to the switches and gain control.
Any help would be greatly appreciated.

Jim

jamesm@nl.rogers.com

Jim I have an old turner +3 that I can have a look at , can you tell me the color of the wires that have been unhooked and I can maybe help you.
Bob

Bob,

I need to know where the three wires from the relay/electronic switch connect.

Thanks

Heres what I have on my mic, with the bottom cover removed from the mic and the mic head facing towards you, mic upside down,on the relay switch there are 6 contacts,right side of switch 1st one is red middle one is green,last one is black. hope this helps and sorry about this type of description,but I wasn't able to draw it out and post it for you.Also where do you live in NFLD, I am from there, used to live in Bay Roberts many years ago
Bob

Please see the attached .pdf file. I hope this helps.