The Defpom Forum, for RadioMods, S&M Software and Music by The Defpom

I have a D104 lollipop, no other markings. I guess the tag has been removed. Opened up the bottom no mods there, looks stock and is not a power mic. Problem is I would like to wire it for my Galaxy DX2547. Anyone know how to wire one of these old Ham Jobs to a Galaxy 4pin? Any info would be great. Looking forward to receiving Ideas. Thanks!!

If you have stock wiring in the D104 you should have Yellow, Black, Blue, Red, White and Screen. If so connect Blue and Screen to Pin 1 on Galaxy, White to Pin 2 on Galaxy, and Red to Pin 3 on Galaxy. Black and Yellow are not used.

Rick.

Man rick your just helping me out alot today. Thanks for the info. I knew it had to be pretty simple stuff. I will try that tonight. I had it all appart looking for cold solders and bad wire ect... seems to be in ok condition if all goes well it should work. Do you know of any place that make partw for these still. I know that's a longshot. Thanks Rick

You could try Ken's they may still have some parts. www.kenselectronics.com

Rick.

StrightClaw no such web URL. 404 error.

Rick.

I don't understand as I am able to go there ??? Good site!!

I have tried this link and hit is not working. can some one else try the link and see if it works.

http://www.rbmicro.com


Chevin.

link works for me also.

I`m also able to access the link StrightClaw posted.

someone needs a new pc link is fine

the link works for me as posted

maybe a IE prob im running firefox

Site works for me. Thanks fella's