The Defpom Forum, for RadioMods, S&M Software and Music by The Defpom

Hi there,

I am after two 5 pin microphone cables for some old tube mics I have. The connectors seem to be the same used for some CB radios (5 pins in a star pattern). I need both the female and male connectors for the cable to work. Any help appreciated.

Mike

Hi,

Have you tried RS Components for the plugs and sockets? They will be dearer than anywhere else but there is a good chance they will have them.

For the cable, you just need 4 core screened which is readily available most places. Even Jaycar may have it.

Have ordered some parts form Jaycar, just not sure the dimensions will be what I need. These are pretty old connectors (1960s Akai CM-15 microphones) and may be obsolete. I have some Rode microphone cable used for thier tube mics that I will use.

Cheers.