The Defpom Forum, for RadioMods, S&M Software and Music by The Defpom

I have no TX power reading on my Galaxy 66 meter, please help

hi there...does it register on rx and no tx..or is it not working in either

HI, yes is working on RX real good, but doesn't move on TX, radio shows 10 watt dead key reading on the bird meter

check diode d-66 for open or short..d-66 is the rf meter detector...but first check vr-8 variable resistor to see if it is adjusted right..vr-8 is the adjustment for tx meter...if it has no effect check d-66..also check vr-8 for open condition..and also check to see if solder connections are good at vr-8..if all check good..then check c-164 for open condition

hi there...it seems i made a boo boo,,the diode for the rf detector is d-86 not d-66 i misread the schematic...

Wowww, thanks for your Help, just replaced D-86, and C- 164, now the meter works real good as before, thanks again.