Page 1 of 1
RM Italy KL-200P Question..
Posted: Thursday 14th Feb 2008, 10:38
by BTJ
I'm thinking about getting a KL-200P linear amp, will this work with my CB?
Posted: Thursday 14th Feb 2008, 12:43
by ramblingman
i bought a klv-250 made by rm,about 2 years ago..held up real well..no problems what so ever...i get about 150 on the low side and about 225 on high..with galaxy drive
Posted: Thursday 14th Feb 2008, 16:15
by BTJ
Is there any way to modify an amp with a frequency of 28-30 MHz to a lower 26-27 MHz frequency for CB?
Posted: Saturday 16th Feb 2008, 22:29
by James Unit 198
The KL200 will work quit happy from 24 to 30 Mhz with on mods but do not put more than 8 watts input or it will not last. I have been using 200 for over 3 years and is still working well.
James.
Posted: Tuesday 19th Feb 2008, 13:47
by hotrod
yup with just a cb type radio a kl amp are very nice and clean
sounding.higher power export type radios seem to overdrive them
from what ive found