The Defpom Forum, for RadioMods, S&M Software and Music by The Defpom

hi i would like to no if i can get more power out of a intek m790 cb at the min it doing 3.5 w on a dead key

is it posable to install a swing kit or put a bigger out put transistor in the cb

any help on this would be a good help to me thanks

HA HA you only get swing or positive modulation on AM.
To get more power you would need to re-deigns the PA strip.
You could try a MOSFET in the final.

thanks for clearing that up rick

can you suggest which final to use