Page 1 of 1
Kenwood TS-430 TX on 27mhz
Posted: Sunday 15th Jun 2008, 22:29
by Willo
Anyone know how to open the TX up on the Kenwood TS-430 so It will TX on 27mhz..Cheers
Re: Kenwood TS-430 TX on 27mhz
Posted: Monday 16th Jun 2008, 0:10
by Rick
A ham transceiver for the ham bands.
CB transceiver for the CB band.
It is highly illegal, to convert a ham transceiver for CB use.
I'm sure others will jump in here with more ideas on this subject.
Posted: Monday 16th Jun 2008, 0:23
by Willo
Yeh i know but I want to be able to get Marine band TX in Australia it starts at 27.680 and goes up.
TS430 MOD
Posted: Wednesday 3rd Sep 2008, 9:16
by arnoldlee
On the the bottom board of the transceicer find the RF-UNIT (X44-1510-11).
Near the two plugs numbered 9 and 10 , you will see two diodes called D39 and D40.
Simply cut the two diodes D39 and D40 on the RF-UNIT.