Page 1 of 1
Icom scanning problems
Posted: Saturday 30th Aug 2008, 1:19
by johno4566
hi i brough a new icon f210 added few extra channels in to it and i got the software
i got the scanning option on but dose not seem to scan can you guys help me thank
if you need more info just ask
Posted: Monday 1st Sep 2008, 16:13
by Uncle Ray
Hi Matey.
This might sound silly but it does work on Philips radios....Have you tried earthing the mic ? OR have you tried placing a magnet on the back of the mic ?
Cheers.
Posted: Monday 1st Sep 2008, 18:33
by johno4566
it came with earth wire but how would i conect it to the mic and i have set it up inside the house
Posted: Tuesday 2nd Sep 2008, 17:02
by Uncle Ray
Hello again.
The back of the mic has a metal clip. Just earth the metal clip. This does work on Philips radios...BUT it does not hurt to try.
Posted: Wednesday 3rd Sep 2008, 12:59
by johno4566
thanks for your help that works now i tyred doing it to the earth and did not work but than i coneted it to the screw on the radios bracket and now it works
Posted: Wednesday 3rd Sep 2008, 15:58
by Uncle Ray
Good work mate. cheers.