whats a good osciliscope
Posted: Monday 13th Oct 2008, 11:47
what do i need to know when buying an osciliscope....what Mhz will be needed an so on
hope you can help
hope you can help
Thanks
The Defpom Forum, for RadioMods, S&M Software and Music by The Defpom
This forum is for discussions on CB radio matters (RadioMods Website), software support with S&M Software, and discussion about my own music.
http://radiomods.co.nz/forum/
whats a good osciliscope
Page 1 of 1
Posted: Tuesday 14th Oct 2008, 3:27
I was about to ask the same question when I ran into this post. I'm also curious to know what kind of oscilloscope to look for.
Thanks
Thanks
Re: Whats a good osciliscope
Posted: Tuesday 14th Oct 2008, 4:05
Any osciliscope that will do 30 MHz plus will do not job.
I have Tektronix scope for sale (UK only) I am open to offers.
I have Tektronix scope for sale (UK only) I am open to offers.
Posted: Tuesday 14th Oct 2008, 5:19
Go Tektronix. I just bought several more recently. They are the most reliable and accurate scopes made. Just check out Tektronix history.
If you can afford a scope with cursers, you will love it for fine measurements.
Experts recommend going 3-4 times over the bandwidth of the highest frequency you will be using. Ricks recommendation will be fine however for most CB needs.
If you can afford a scope with cursers, you will love it for fine measurements.
Experts recommend going 3-4 times over the bandwidth of the highest frequency you will be using. Ricks recommendation will be fine however for most CB needs.
Re: whats a good osciliscope
Posted: Sunday 12th Apr 2009, 16:49
So a tecktronic at 100 mhz should handle any cb needs, is that correct?