The Defpom Forum, for RadioMods, S&M Software and Music by The Defpom

Radio Make and Model: Midland alan 8001 plus
PCB Number:
PLL Number:
Test gear available:
Symptoms: display 1 - 2 kc's off what the frequency really is

What is working:

What has been tried:

Did it suddenly happen ?:
Anything else that may be of help?: anyone know what to adjust

Hi!
On the solder side is a trimmer. There can you adjust the freqency counter. Please adjust it in warm condition with a plastic tool. If you have an external counter, adjust it slightly in TX mode until it matches the right frequency. Maybe you have to align the complete radio in RX and TX. The superstar 3900 service manual should match the Alan 8001 board in most cases.
73s, Ralf

Thanks mate, i seen that. I'll give it a bash. TA