Page 1 of 1
Needing a picture of the PCB of a Midland 79-265
Posted: Saturday 2nd Oct 2010, 3:20
by Exit_Thirteen
Radio Make and Model:
PCB Number:
PLL Number:
Test gear available:
Symptoms:
What is working:
What has been tried:
Did it suddenly happen ?:
Anything else that may be of help?:
Re: Needing a picture of the PCB of a Midland 79-265
Posted: Saturday 2nd Oct 2010, 3:25
by Exit_Thirteen
Hmm, it didn't save any of my info!
Midland 79-265
PLL: LC7131 SSB
Problem: Missing LC1
Looking foir someone that may be able to take a picture of the PCB on a Midland 79-265 AM/SSB CB. I am missing LC1 near the back of the PCB, next to the SO239 connector where the antenna plugs in. I got the radio this way. It looks like it is a ferrite "donut" with a couple wires that wrap around it. See the picture below. Any info would be greatly appreciated. Thanks!!
(edit) I installed jumpers where LC1 is to restore operation. I'd like to get the correct part in the radio.
