RCI2995DX problem

For discussions on CB Radio Repair and Troubleshooting, do not post modification requests here, use the Modifications forum !
Post Reply
BBUGIN
Newbie
Newbie
Posts: 3
Joined: Thursday 3rd Feb 2011, 13:40
First Name: RICH
Location: NJ

RCI2995DX problem

Post by BBUGIN »

In the LSB or USB mode it takes 2 seconds of my key to activate my audio... So when I key and start a count 1,2 Count 1 audio is heard low and count 2 it get lower and by count 3 I'm at full modulation ... This happens only on SSB and not on AM... Any suggestions ? Thanks all who respond... Rich
Top
BBUGIN
Newbie
Newbie
Posts: 3
Joined: Thursday 3rd Feb 2011, 13:40
First Name: RICH
Location: NJ

Re: RCI2995DX problem

Post by BBUGIN »

I found the problem today and its back on the air
Top
Post Reply

Return to “CB Radio Repair and Troubleshooting”