Page 1 of 1
Channel switch Cobra 148 glt-dx
Posted: Thursday 22nd Jun 2006, 3:12
by Chevin
Can anyone help me with channel switch for cobra 148 gtl-dx
Posted: Sunday 25th Jun 2006, 12:47
by zodiac
Chevin,
What's the problem with the one you have or don't you have one at all, I've repaired and rebuilt many of them.
Dave.
Channel switch
Posted: Tuesday 27th Jun 2006, 10:02
by Chevin
Dave,
I have been given a SS360 but the channel switch and display are missing, i have display from my junk box but i need a channel switch i have been told that the jackson is the same but i dont know if this is right?
Posted: Wednesday 28th Jun 2006, 7:07
by zodiac
Chevin,
The codes shoud be the same for the Jacko as the Cobra 15 to 59, all Uniden channel switch codes are the same for SSB/AM/FM radios check it out to make sure.
Dave.
Posted: Wednesday 28th Jun 2006, 7:08
by zodiac
Chevin,
The codes shoud be the same for the Jacko as the Cobra 15 to 59, all Uniden channel switch codes are the same for SSB/AM/FM radios check it out to make sure.
Dave.
Channel switch Jackson
Posted: Wednesday 28th Jun 2006, 9:54
by Chevin
Thank your your help Dave try to phone you but you was on the phone. I am getting a new switch off Rick i think he is your mate, very helpful chap he sort out my problem with my rci 2950 he put me right on the part to change.
Posted: Thursday 29th Jun 2006, 3:45
by zodiac
Yes he is the man, I'd be lost without him.
Dave.
Cobra 148gtl-dx Channel switch
Posted: Friday 30th Jun 2006, 8:53
by Chevin
Can any one help me with the hardware which go round the channel switch the bracket and 2 boards 1 for the display and the bottom 1 where the wires come from the pll to the switch, I also need a sig/rf meter.
Cobra Channel switch
Posted: Monday 17th Jul 2006, 4:33
by Chevin
i sent my radio to Rick at euro radio co and he sort it out at a very good price. Thanks Rick once again.