HA11225
uPC1167C2
M51173P
FM IF-Amplifier and Discriminator
FM IF Amplifier and Demodulator with Muting, Center Meter and Signal Meter
Features:
Low Distortion
High Signal-to-Noise Ratio
High Limiting Sensitivity
Large Muting Attenuation
Provides Specific Signal for Direct Drive of a Signal Meter with Good Linearity
Muting Level is variable by Adjusting the External Resistor
High Stability Against Abnormal Oscillation
Applications:
FM IF Amplifier
Quadrature Detector
Audio Amplifier
Muting Circuit
AFC, Tuning Meter Driver
AGC Control Voltage Generator
Muting Control Voltage Generator
Signal Meter Driver
Pin | Name | Description |
1 | | IF Input |
2 | | AM/FM Switch |
3 | | Bypass |
4 | | Ground |
5 | | Mute Input |
6 | | Audio Output |
7 | | AFC Output |
8 | | Quad Detector |
9 | | Detector Coil |
10 | | Detector Coil |
11 | | Positive Supply Voltage |
12 | | Mute Output |
13 | | Meter Driver |
14 | | Ground |
15 | | RF AGC |
16 | | Mute Adjust |
This counter shows the number of hits since the
29th January 2000
Go Back To The Components Page
Go Back To The Main Home
Page
Copyright © The Defpom 1997-2008
https://www.radiomods.co.nz/