LC72336 / LC72338 Single-Chip Microcontrollers with Built-In LCD Driver and PLL Circuits

Overview
The LC72336 and LC72338 are single-chip microcontrollers for use in electronic tuners. These products include on chip a PLL circuit that can operate at up to 150 MHz and 1/3 duty LCD drivers. They feature a highly efficient instruction set and powerful hardware.

Functions
High-speed programmable divider
Program memory (ROM)
? LC72336: 6143 ? 16 bits (12 kB)
? LC72338: 8191 ? 16 bits (16 kB)
Data memory (RAM): 512 ? 4 bits
All instructions are one-word instructions
Cycle time: 1.33 ?s
Stack: 8 levels
LCD drivers: Up to 96 segments (1/3 duty, 1/3 bias)
Serial I/O: Up to 3 channels (8-bit 3-wire type)
External interrupts: 2 interrupts (INT0, INT1) Interrupt on rising or falling edge (selectable)
Internal interrupts: 3 interrupt Two built-in timer interrupts and 1 serial I/O interrupt
Nested interrupt levels: 4 levels
D/A converter: 4 channels (8-bit PWM output)
A/D converter: 4 channels
(6-bit successive approximation) General-purpose ports:
? Input ports: 8
? Output ports: 12 (16 maximum)
? I/O ports: 8 (20 maximum, can be switched between input and output in bit units.)
PLL block: Supports 4 types of dead zone control, and includes a built-in unlock detection circuit. Supports 12 different reference frequencies.
Universal counter: 20 bits (Can be used for either frequency or period measurement.)
Timers: Eight types of time measurement
Beep function: Six beep tones
Reset: Built-in voltage detection type reset circuit
Halt mode: Stops the controller operating clock.
Operating supply voltage: 4.5 to 5.5 V (3.5 to 5.5 V if only the controller block operates.)
80-pin QIP

General programming guidance of LC72336/8 devices with Maycom CPU SYSTEM EM27
The processors SYSTEM EM27 with label Maycom are customized mask-programmed CPU's on base of the LC 72336/8 CPU from Sanyo.
Those in the following specified possibilities apply only to CPU's with the above Maycom designation and not to others!

EM27 Block Diagram

General programming guidance of LC72336/8 devices with Maycom CPU SYSTEM AH29
The processors SYSTEM AH29 with label Maycom are customized mask-programmed CPU's on base of the LC 72336/8 CPU from Sanyo.
Those in the following specified possibilities apply only to CPU's with the above Maycom designation and not to others!

This counter shows the number of hits since the 29th January 2000

Go Back To The Components Page

Go Back To The Main Home Page

https://www.radiomods.co.nz/