Ham Intl. tuning prob

[yazzo]

Radio Make and Model: Ham International Concorde II
PCB Number: PTBM121
PLL Number:
Test gear available: Freq counter
Symptoms: Mid band cannot be tuned correctly, CT2 will go 20.327-20.328 MHz

What is working: Lo and Hi band can be tuned normally

What has been tried: Changed Mid band crystal to Lo band slot and did the same thing there

Did it suddenly happen ?: Worked fine 2 months ago, has been powered off and now it doesn't
Anything else that may be of help?:

[zodiac]

It sounds like the Mid band crystal has had it's day and needs replacing, what frequency is on it as I might have one.

[yazzo]

20.330 MHz, grrreat if you have one

[zodiac]

How many do you need.

[yazzo]

I'll be happy with one! You will receive pm shortly.

[zodiac]

What type is it, is it plug in or soldered in.
Dave.

[yazzo]

Plug in. There are slots for xtals in the board.

[zodiac]

I've posted you one of each, with a bit of luck that should sort your problem out.

[yazzo]

Thanks!!

[yazzo]

Got it today, thanks a million for fast mailing and bringing HAMmer back to business!!

[zodiac]

Your welcome and if you ever need a S.Hi crystal I've got loads of them.
Dave.