Page 1 of 1

Connex 3300 static on tx, tx lite fades w/static

Posted: Thursday 8th Mar 2007, 8:59
by SoCal392
its getting worse the more i use. allmost will not transmit at all. static was in rx also but it doesnt seem to be anymore. which ic or transistor actuates the tx? thx peeps

Posted: Thursday 8th Mar 2007, 16:05
by SoCal392
btw this is a 14b pcb

Posted: Saturday 10th Mar 2007, 22:45
by SoCal392
after close examination and troubleshooting, I replaced the crystals on pcb and bam! sucker is up and running again :)