RadioMods Ranger 6900F Mods Page

Modifications

Ranger 6900F modifications

Ranger 6900F Frequency Mod
EPT990010Z chassis.

1. Remove 100 ohm 1/8 watt resistor on bottom of PCB in 4008 divider area.
2. On J30, move the shorting block to pins 2-3.
3. Follow the Hi/Lo switch wire down to the mainboard and unplug it from J5.
4. Move it to J29, in front of J30.
5. Don't bother with J27.

This mod was sent to me by Les Jernigan

This counter shows the number of hits since the 28th December 2000

Go Back To The Modifications Page

Go Back To The Home Page

Go Back To The Main Home Page

https://www.radiomods.co.nz/