The Defpom Forum, for RadioMods, S&M Software and Music by The Defpom

I had to adjust the meter pot.
It is fine now.
Thanks
GOD BLESS

Hello to all.
Today my Cobra 25 LTD Classic started when I key up the needle slams to the right.
I have the swing mod in it and a variable using the rf gain knob.
Even when I have it set to 2 watts it still slams.
Any ideas?
Thanks
GOD BLESS

Hello.
When I key up my 29 the lights go out till I unkey.
Also the channel selector stays on 19.
I can hear the channel clicking when turning the knob and I can see the shaft turning in the back.
Thanks

Hi to all.
Maybe a stupid question but here goes.
When setting a radios dk should the amp be on or off ?
I have read in some forums saying set the dk on the amp to 100 watts.
Thanks

Which should I use to drive a KLV 550 amp.
My Connex 3300 ( not the HP model ) or
my Realistic TRC 454 base.

I am thinking of getting a beam.
I am limited to how high I can go.
My antron 99 is 45 ft.
Whats the lowest a beam can be?
Thanks

--------------------------------------------------------------------------------

I have tried the different combinations but no good.
The closest I got was it squealed when I keyed up.

Can I put a road devil mic on a trc 454 cb fone which is a five pin.
If so what is the pin wiring

Hello to all!
I am looking for a driver for my Cobra 29 wx nw st.
The number is 2sc2314 is the one that came out.
I was told that the older ones had 2sc1957 in them.
Any idea where I can get one or if I can substitute with something else.
Thanks
GOD BLESS

Any ideas where a fella can get one?
Thanks

I removed the driver and the #'s are
C2341
F 4m
Can this driver be identified with those numbers.
Where can I find one?
Thanks

How do I check a driver?
Thanks

--------------------------------------------------------------------------------

Howdy.
If the driver is bad in a Cobra 29 will it rx and not tx.
What does the driver do?
Thanks to all who answers.
GOD BLESS

-------------------------------------------------------------------------------- Hello!. Can anybody tell me what might be wrong with my Cobra 29 wx nw st? I stated in another post the squelch dont work and needle dont move but now they do. I changed the final with a stock one. Now it dont tx or the...

I have a Cobra 29 wx nw st and no sound rx or tx.
My needle on the radio meter and the Dosey inline meter don't move
when rx or xt.
No squelch.
When in weather mode it rx loud and clear.
Could it be my final?
How do ya check a final?
Thanks
GOD BLESS

Hello. My wife and I are moving to Jefferson City Missouri the 1st of August. Does anybody know of any good cb shops in that area? I want to get all my radios peaked & tuned. Thanks -------------------- My Toys Connex 3300 Cobra 25 LTD Classic Cobra 29 WX/NW/ST Realistic 454 CB Fone Galaxy DX95T...

I'am sure glad you guys ( and gals ) are here.. I recently got a Cobra 25LTD Classic. It works great. On a Dosey meter it dk's at 4 watts and swings to 15 watts. Dont know whats been done to it. My problem is ( if it is a problem ) that the meter shows around 9 # of noise where my other radios show ...

Hello.
I am wondering if the Cobra 29 NightWatch/Weather can be modified
like the 29LTD by installing the ERF2030's

I am wondering which Galaxy to get. The DX93T or DX95T.
I have a chance to get one or the other cheap.
Thanks
GOD BLESS

I have a Connex 3300.
I am getting a Black Cat HD 300.
What should the deadkey be set at?
Thanks
GOD BLESS

I have an older 3300 (not HP) with echo.
The echo has to be on for the talkback to work.
Hope this helps
GOD BLESS