Search found 3 matches

by turismo05
Tuesday 11th Nov 2008, 20:35
Forum: CB Radio Repair and Troubleshooting
Topic: Ham International Concorde 2
Replies: 7
Views: 12976

Re: Concorde 2 no TX power.

Please use the Post Subject. Check the voltage at each side of L11 in FM TX mode, if no volts check the mode switch as you may find a broken wire or a bad mode switch. Good luck lots of wires around the mode switch. I have checked and no volts either side of L11 in FM TX mode. The wiring at the mod...
by turismo05
Monday 10th Nov 2008, 7:41
Forum: CB Radio Repair and Troubleshooting
Topic: Ham International Concorde 2
Replies: 7
Views: 12976

Thanks for the replies guys

I checked to collectors of Q9 and Q10 in FM tx and 0 volts

In AM around 5 Volts

In USB/LSB I get 13.5 volts

All help much appreciated

Tony
by turismo05
Saturday 8th Nov 2008, 2:05
Forum: CB Radio Repair and Troubleshooting
Topic: Ham International Concorde 2
Replies: 7
Views: 12976

Ham International Concorde 2

Hi all, Can any one help with getting my old Concorde II back in order? The RX is fine on all channels The problem is the TX on FM/AM. USB/LSB Seem o.k I have it connected up to a SWR meter and ariel. On FM when TX the SWR meter not move at ALL On AM the SWR meter move a small amount when whistling ...