29 ltd low transmit

For discussions on CB Radio Repair and Troubleshooting, do not post modification requests here, use the Modifications forum !
Post Reply
sandy
Dead Key
Dead Key
Posts: 10
Joined: Wednesday 17th Oct 2007, 13:29
Location: Quartz Hill, Calif.

29 ltd low transmit

Post by sandy »

:( :?: I installed A 2030,1230 removed the other parts ect. I have done this before with no problem, but this time I have low out put ! I have gone back over everything all my solder joints ect. are good, can't figure it out!!!!!!
Please help. thanks...
Top
StrightClaw
Light User
Light User
Posts: 105
Joined: Wednesday 31st May 2006, 6:25
Location: Remlap Alabama

Post by StrightClaw »

what radio ?
Top
StrightClaw
Light User
Light User
Posts: 105
Joined: Wednesday 31st May 2006, 6:25
Location: Remlap Alabama

Post by StrightClaw »

sorry what were the other radios?
Top
sandy
Dead Key
Dead Key
Posts: 10
Joined: Wednesday 17th Oct 2007, 13:29
Location: Quartz Hill, Calif.

29 ltd low trasmit

Post by sandy »

all the radios that i have don this mod on were cobra 29 ltd

thanks... :)
Top
User avatar
Rick
Technical Helper
Technical Helper
Posts: 1041
Joined: Sunday 4th Jun 2006, 12:52
Location: UK

Re: Cobra 29 ltd low trasmit

Post by Rick »

You may have a bad 2030, try going back to stock, to see if the fault is still there.

Rick.
Top
StrightClaw
Light User
Light User
Posts: 105
Joined: Wednesday 31st May 2006, 6:25
Location: Remlap Alabama

Post by StrightClaw »

I'm no expert by any means.But I have had to change the driver before to get a couple of them to pick up.
Top
Post Reply

Return to “CB Radio Repair and Troubleshooting”