President Uniden Washington

For discussions on CB Radio Repair and Troubleshooting, do not post modification requests here, use the Modifications forum !
Post Reply
User avatar
marveylus22
Light User
Light User
Posts: 109
Joined: Saturday 19th May 2007, 11:03
Location: Las Vegas Nevada

President Uniden Washington

Post by marveylus22 »

8719 pll pcb 385

I have a freq counter I want to wire to it. The freq counter is a Galaxy II FC-250. This one you can run it with coax, or wire it in to the signal with a red, and black wires. Thank you.
User avatar
marveylus22
Light User
Light User
Posts: 109
Joined: Saturday 19th May 2007, 11:03
Location: Las Vegas Nevada

Post by marveylus22 »

Would the red wire go to tp-3, and the black to ground?
User avatar
marveylus22
Light User
Light User
Posts: 109
Joined: Saturday 19th May 2007, 11:03
Location: Las Vegas Nevada

Post by marveylus22 »

Ramblingman any ideas?
User avatar
Rick
Technical Helper
Technical Helper
Posts: 1041
Joined: Sunday 4th Jun 2006, 12:52
Location: UK

Re: Galaxy II FC-250 frequency counter.

Post by Rick »

The Galaxy II FC-250 frequency counter is an in line unit, which go in line between the ant and the rig the red and black are to power the unit up and go to the power supply (13.8 Volts).

Rick.
User avatar
marveylus22
Light User
Light User
Posts: 109
Joined: Saturday 19th May 2007, 11:03
Location: Las Vegas Nevada

Post by marveylus22 »

Thanks for replying Rick.
Post Reply