Cobra 2000GTL freq counter

For discussions on CB Radio Repair and Troubleshooting, do not post modification requests here, use the Modifications forum !
Post Reply
inkslinger
Newbie
Newbie
Posts: 2
Joined: Monday 19th Jun 2006, 9:26
Location: Colorado

Cobra 2000GTL freq counter

Post by inkslinger »

Is it typical/correct for the RX and TX frequency as displayed on the counter to be different from each other? My transmitt freq is about 1.6 kHz lower than the recieve frequency dispalyed.

This is a "new to me" radio purchased at a garage sale. All else seems to work OK.

Thanks, Martin
Top
inkslinger
Newbie
Newbie
Posts: 2
Joined: Monday 19th Jun 2006, 9:26
Location: Colorado

TX/RX Frequency difference

Post by inkslinger »

I resolved this by adjusting one of the inductors in the PLL
Top
Post Reply

Return to “CB Radio Repair and Troubleshooting”